Inflatable Hollow Insulating Glass Production Line

brand new Insulating Glass Production Line,Insulating Glass Production Line.GLASS LINE ,green 2020new production

LJBZ2535G fully automatic inflatable hollow glass flat compression section. It is suitable for laminating double layer and multilayer insulating glass.

This machine can be used to compress hollow glass composed of planar glass of various shapes (including coated glass and laminated glass, etc.).

LJBZ2535G is a hollow glass laminating machine with new aeration technology.

This machine is applicable to all kinds of new and high science and technology of gas or mixed gas air pressure machine, because in all kinds of gas or mixed gas control system test before filling the hollow glass preset gas species (including mixed gas mixing ratio) and flow.

LJBZ2535G is not suitable for arched glass or twisted glass because the plane inside the press is immutable.

LJBZ2535G can measure the aeration concentration in the hollow glass online. The measuring device in the front section of the equipment can accurately measure the size and thickness of the glass, and calculate the required amount of gas.

1 Site conditions:

1 Power supply voltage:AC380V±10V 3P+N+PE 50Hz

2 Environment temperature:15～35℃

3 Working air pressure:0.5～0.8MPa

4 Industrial tap water: PH = 7 ± 1 Conductivity ≤ 40μs / cm

5 Site requirements: clean and dust-free

As shown in figure 1, right place every sections of the IG line, adjust paragraphs leveling base, make the transfer roller, return roller bearing surface contour.. Properly setting of fan and water tank (water treatment device user chooses to be prepared), and by water, wind road system diagram to connect the air duct, water pipe. Display the electric control cabinet correctly and connect all the electronic control circuit according to the diagram of electrical system.

This sensor is installed before washing machine. It can automatically recognize Low-e glass surface fast and precisely, preventing the glass from dropping Low-e surface.As different countries have different water quality, in order to ensure that the glass is washes clearly enough, adopting air heating system, to use soft water to wash glass. What’s more, using water filter system to make water recycling, save water and keep the water clear.The special structure inside the washing machine can automatically recognize glass thickness. Allowing different thicknesses of glass to be transferred quickly, increasing production speed. According to the test, it takes only 22s to produce a 1m*m insulating glass.

glass processing machines

double glazing production

Inflatable Hollow Insulating Glass Production Line Images